| MAJIC SUPER SEALER Repels stains & oils
Majic Stone Tel: 02 9816 4555 Fax: 02 9817 8555 FLAMMABLE SUPER SEALER provides lasting protection against staining
for all granite, porcelain, terrazzo, travertine, dark marble, vitreous
tile and cement grout. It is a penetrating, invisible and breathable sealer.
HOW TO USE: 1. ALWAYS TEST PRODUCT ON A SMALL
AREA FIRST. Allow a 24-hour cure time. Check that the sealer
does not discolour the grout or tile. 2. Remove and repair
all loose or missing grout. 3. Ensure surfaces to be
treated are dry, clean and free of residues. 4. Apply
when the surface temperature is below 35 deg C Generously saturate the
surface with product using a low-pressure hand pump, a clean brush, or
similar. Avoid contact with surrounding areas. Application rate is approximately
1 litre per 10 to 30 square meters, depending on porosity. 5.
After 15 minutes, repeat over entire area. 6. Allow 15
minutes for product to soak in then buff surfaces with a clean white dry
cloth to remove excess product. Clean equipment with mineral turps. 7.
Let the product dry for a minimum of 12 hours before using the surface.
8. Sealer will not prevent surface etching or wear. Clean-up
stains immediately to minimise absorption. PRECAUTIONS: Do
not take internally. Avoid contact with skin and eyes. Avoid breathing
vapours. Wear protective eye goggles, gloves and clothing. Ensure area
is well ventilated. Keep away from naked flames and ignition sources.
FIRST AID: If ingestion occurs, contact doctor or Poisons
Information Centre (Australia-phone 131126). DO NOT INDUCE VOMITING. Give
a glass of water. After eye or skin contact wash off immediately with
plenty of water. STORAGE: Keep container tightly. sealed,
in a cool well-ventilated place. Contains hydrocarbons & impregnates.
Proper Shipping Name: Ethyl Alcohol Solution, FLASH POINT: 13 deg C, D.G.
Class: 3, UN No.: 1170 PG: II, HAZCHEM: 2[Y]E. MADE IN AUSTRALIA |
||